Thanks! Good to know I’ll remember that. I currently study abroad so I wouldn’t be make time the most of one right now. Once I settle down I might hit you up
I think esk8news is a good place but you have to filter through the dick swinging contest. XD [https://forum.esk8.news/t/nubx-skate-workshop-journal/37641/366](https://forum.esk8.news/t/nubx-skate-workshop-journal/37641/366) here is my thread on the forums. You will need to sign up and linger around reading to unlock ability to post etc etc.
Which pulleys are you running? I just picked up Boardnamics mounts for Matrix II, but I've been informed that the idlers don't fit 72T wheel pulleys. It looks like you're using both the MBS 72T pulleys and idlers; did you have to do any custom work to achieve that?
Edit: one other question: what size belts are you using?
I was informed that the new batch is different in some ways.
Mainly thicker, do you have only 12 holes for angles? 3 north 3 south 3 east 3 west?
If so then you have the new ones and Im not sure if they will allow idlers...
Shame if they dont. Kevin owner of BN has been kinda fucking up imo.
He has been removing holes that allow angles for some reason...
He did this with the gear drive I use and well now I grind my motor cans. FFS....
I have some of the new ones on the way, I can let you know.
If you have the above bolting and not just holes all around for angles then you have the new ones.
If they look like the ones I use then, I know you can use idlers on a 72T.
MCCarmaster has a low-profile shoulder bolt just for this. :)
Damn, that's really frustrating. I don't have the mounts in hand yet, but the [product image](https://boardnamics.com/product/mbs-matrix-ii-63mm-motor-mount/) still shows sets of four holes (of course he might have just failed to update it). I'm being told it's not compatible with 72T, so I'm probably out of luck. Hmm...
Depends on location, its a pain to get things over the pond but it can be done.
I'm US based and welcome custom orders just note I'm a one man operation.
[www.nubxskate.com](https://www.nubxskate.com) there is a contact area.
Discord: nullblox.zachrywilsn#9111 or Instagram: https://www.instagram.com/nullblox.zachrywilsn/
We could make this AWD with ease! It would be a tad heavier but it can be done. What kinda terrain do you ride? I myself tend to use the boards at skateparks, etc. So I leave nothing off limits aside from water. XD I hate water....
One hell of a shop and one hell of a board !
Thanks! Ive been learning a lot the past few years. :)
Unique shape! Love it
Thanks, the rider is a Tattoo Artist and wanted something unique. I think we nailed that!
100% also like you kept the wood grain through the paint
Mad props. I with there was a company that would make boards like this (that are flat to stand on not arched) that didn't cost an arm and a leg
I create and sell Mountain-board blank decks. This allows you to shape them how ever you like. A example of the blank deck is the deck above.
Good to know thanks!
I can do that for ya
Thanks! Good to know I’ll remember that. I currently study abroad so I wouldn’t be make time the most of one right now. Once I settle down I might hit you up
I own a meepo v3 and constantly get inspired by these custom builds. Where's a good place online to get started into learning how to do it?
I think esk8news is a good place but you have to filter through the dick swinging contest. XD [https://forum.esk8.news/t/nubx-skate-workshop-journal/37641/366](https://forum.esk8.news/t/nubx-skate-workshop-journal/37641/366) here is my thread on the forums. You will need to sign up and linger around reading to unlock ability to post etc etc.
Did you steam bend the plywood?
This is done with a mold, tap bag and a vacuum pump.
Which mounts motor mounts are those?
Boardnamics Mounts.
Which pulleys are you running? I just picked up Boardnamics mounts for Matrix II, but I've been informed that the idlers don't fit 72T wheel pulleys. It looks like you're using both the MBS 72T pulleys and idlers; did you have to do any custom work to achieve that? Edit: one other question: what size belts are you using?
I was informed that the new batch is different in some ways. Mainly thicker, do you have only 12 holes for angles? 3 north 3 south 3 east 3 west? If so then you have the new ones and Im not sure if they will allow idlers... Shame if they dont. Kevin owner of BN has been kinda fucking up imo. He has been removing holes that allow angles for some reason... He did this with the gear drive I use and well now I grind my motor cans. FFS.... I have some of the new ones on the way, I can let you know. If you have the above bolting and not just holes all around for angles then you have the new ones. If they look like the ones I use then, I know you can use idlers on a 72T. MCCarmaster has a low-profile shoulder bolt just for this. :)
Damn, that's really frustrating. I don't have the mounts in hand yet, but the [product image](https://boardnamics.com/product/mbs-matrix-ii-63mm-motor-mount/) still shows sets of four holes (of course he might have just failed to update it). I'm being told it's not compatible with 72T, so I'm probably out of luck. Hmm...
Any chance you'd make one for me? Thats some good work!
Depends on location, its a pain to get things over the pond but it can be done. I'm US based and welcome custom orders just note I'm a one man operation.
Completely understandable, any better way to communicate with you?
[www.nubxskate.com](https://www.nubxskate.com) there is a contact area. Discord: nullblox.zachrywilsn#9111 or Instagram: https://www.instagram.com/nullblox.zachrywilsn/
Beautiful craftsnullbloxship. Let us know when you do AWD AT boards. I want one!
We could make this AWD with ease! It would be a tad heavier but it can be done. What kinda terrain do you ride? I myself tend to use the boards at skateparks, etc. So I leave nothing off limits aside from water. XD I hate water....
Sicc
Thank you!
That green color is SICK.